Rusty – SD TEC – Surfboard

The origins of The SD are well documented. June 2016, we delivered a board for the filming of Stab in the Dark, shot in South Africa later that summer. I wasnt sure who the Pro was. 60 190lbs. Maybe Jordy? But hes a bit taller. I built a modified Yes Thanks. One of Josh Kerrs models. #46. Puffed up the Yes Thanks, a little. Moved the thickness flow, balance point, a little forward. Fairly deep single that zeroed out under the rear fin and finished with a slight vee in the tail. Smooth curve that accelerated towards the tail. 60 19.25 2.5 31.4 Liters. The mystery surfer turned out to be Dane Reynolds. It felt quite a bit different from the other boards Ive been riding, remarked Dane. Its got a low rocker, hard edges and a pinched deck It had a lot of speed and drive. It felt like a good board. I got a couple of barrels on it but I couldnt really do a turn. As it turns out Rusty wasnt the only one experiencing a little identity confusion. Dane actually thought the board was a Creed McTaggart model cut by the hand of Hayden Cox. Suffice to say the board could move through a tunnel just watch that first ride. If you watch the video, in my humble opinion, Dane surfed the board with solid authorityripped. A few months later, my son, Clint, named it the SD. Tweaked it a little. Added a bit of rocker. For the last 5 years it has been one of our most popular designs.

Available Dimension

TEC Technology

Torq Epoxy Composite offers performance shapes in our state-of-the-art epoxy layup. These boards have the best balance of Lightweight versus Durability. Using our own unique lamination process, we are able to use a very strong fiberglass lay-up of 6oz and 4oz combined in 3 layered deck and 2 layered base (with a 4 layered rail lap) with a high density EPS foam, but still achieve a board weight that matches a lightweight fiberglass lay-up.

The result is light but very strong board, with good flex characteristics and as with all Torq’s excellent value for money.