Severne Fox V3 Board

As a close out model, stock is not live and with supplier. Contact us for more details and accurate stock

FOX V3

PERFORMANCE FREERIDE

The next generation Fox is designed to take performance freeride to the next level. Just as its predecessor,

The Fox V3 maximises full power-on blasting capability through the choppiest water you can find.

Continuous rocker, moderate tail width, and extreme forward vee provide unique levels of control. Thrives on overpower. Confident commitment where others caution. Blaze through the corners with the best gybe in the business.

Dont let the comfort deceive you in real-world conditions, the Fox delivers unmatched high performance fun.

023 UPGRADES
/ NEW OUTLINE IMPROVES ACCELERATION AND BOTTOM END
/ NEW, AESTHETIC ROUND NOSE
/ INTEGRATED RAMPS UNDER FRONT AND REAR PADS
/ LIGHTWEIGHT DECK PADS
/ NEW MID-RANGE 115 SIZE
/ NEW 135 WITH NARROWER OUTLINE, MORE COMPACT DESIGN
/ DYNAMIC BRAND COORDINATED RED COLOUR SCHEME

SIZES: 95 / 105 / 115 / 125 / 135

TECHNOLOGY

> Increased stability – Parallel outline reduces drag and increases stability.

> New, aesthetic nose – A new round nose gives the Fox V3 a desirable look

> Fast acceleration – Lowered entry angles for more efficient acceleration and less impact over chop

> Reduced fatigue – Optimised deck angles and ramped deck pads for maximised comfort and ensure correct foot angles for reduced fatigue.

> Optimal control – pronounced panel V through tail sections for optimal control and superb gybing.

> HEX 4-

A single tool does everything.

1. Batten tension adjustment.
2. Fin screws (both SlotBox and PowerBox).
3. Footstrap installation.
4. Beer opener.

The HEX4 tool is supplied with every sail and every board. Compared to a Philips screwdriver, the 4mm hex key is a much easier system to tighten and adjust footstraps and fins. It only requires a rotational movement rather than downforce + rotation. The wide boomerang gives enough leverage to fully tighten footstraps with a fraction of the effort of a Philips screwdriver.

> F Series Fins –

Rather than just matching an existing fin to a board, each F-Series fin is customised to the exact Fox board its designed for. Rake angles increase as board size decreases to maintain control as conditions get more extreme. Surface area, base chord length and profiles are selected for each individual fin in order to maximise the performance of the complete unit.

G10 is the material of choice due to its consistency and durability. The fins outline is designed to make the most out of this G10 material twist is minimized with the narrow tip, and flex is controlled with the chord lengths.