Hose Barb Elbow Fitting

This speciality fitting will allow you to make hose connections at a 90 degree angle with 3/4″, 1″ or 1-1/8″ without any kinking.

For various reasons it can be beneficial to join two hoses at a right angle. Most often used for routing around a sharp angle without kinking the hose, which opens up additional options when it comes to hose routing during the installation of an automated ballast system.

Select the correct size for the inside diameter (ID) of the hose you’re using. You will also need two standard worm-drive stainless steel hose clamps or two of our stainless steel pinch clamps to make a secure water-tight connection.