Severne Fox 2025

As a 2025 model, this may be on a pre order or incoming delivery, so stock shown may be a few days wait or a pre order delivery. Contact us for more details.

FOX

PERFORMANCE FREERIDE

Building on the major performance upgrades of previous iterations, the FOX is now engineered to be as light as ever while maintaining its defining characteristics.

The proven continuous rocker, moderate tail width, and pronounced vee create a platform that delivers unmatched control at speed. A new lightweight pigmented resin construction reduces weight while maintaining the legendary FOX control.

When other boards back off in the rough, the FOX thrives. Push it harder, ride it faster. Every detail inspires confidence in any sea state. Integrated ramps under front and rear pads position the rider naturally for reduced fatigue and maximum power transfer. Command the corners with confidence the higher resolution shape and sharper tuck edge deliver cleaner water release. The FOX holds its line through the hardest power gybes and accelerates out with authority.

Plug-n-play simplicity maximises water time. Single Powerbox fin secured with one HEX-4 screw the same tool that handles footstrap adjustment. No hassle, no compromise. New camo deck pads gets you looking sharper, even before youve hit the water.

Dont let the technical comfort deceive you in real world conditions the FOX delivers unmatched high-performance fun. The lightest FOX ever. Challenge accepted. Game on!

UPGRADES FOR 2025
> LIGHTWEIGHT PIGMENTED RESIN CONSTRUCTION WITH MINIMAL PAINT
> IMPROVED WEIGHT
> CAMO PADS
> HIGHER PRECISION SHAPE
> SHARPER TUCK EDGE

TECHNOLOGY –

• New aesthetic nose – A new aesthetic round nose gives the Fox a desirable look.
• Fast acceleration – Lowered entry angles for more efficient acceleration and less impact over chop.
• Parallel rails – Parallel outline reduces drag and increases stability.
• Reduced fatigue – Optimised deck angles and ramped deck pads maximises comfort and ensure correct foot angles for reduced fatigue.
• Minimum paint – A new lightweight pigmented resin construction reduces weight while maintaining the legendary FOX control.
• Optimal control – Pronounced panel V through tail sections for optimal control and superb gybing.
• F-series fin – Rather than just matching an existing fin to a board, each F-Series fin is customised to the exact Fox board its designed for.

  Rake angles increase as board size decreases to maintain control as conditions get more extreme. Surface area, base chord length and profiles are selected for each individual fin in order to maximise the performance of the complete unit.

  G10 is the material of choice due to its consistency and durability. The fins outline is designed to make the most out of this G10 material twist is minimized with the narrow tip, and flex is controlled with the chord lengths.

Fins

HEX4 – A single tool does everything.

1. Batten tension adjustment.
2. Fin screws (both SlotBox and PowerBox).
3. Footstrap installation.
4. Beer opener.

The HEX4 tool is supplied with every sail and every board. Compared to a Philips screwdriver, the 4mm hex key is a much easier system to tighten and adjust footstraps and fins. It only requires a rotational movement rather than downforce + rotation. The wide boomerang gives enough leverage to fully tighten footstraps with a fraction of the effort of a Philips screwdriver.