Kicker KMA 450.6 Amplifier

This amplifier has the versatility to power your entire speaker system and deliver that unmatched Kicker sound. This KM-Series six-channel amplifier can be configured to deliver 75 watts into six channels or 150 watts bridged into three channels. Includes the power amplifier, remote control, remote cable, and mounting hardware.

Rock the boat using this Kicker KM six-channel marine amplifier. Connect as many as 12 speakers in three independent zones to control the volume level on the tower speakers, in the cabin, and wherever else you put the sound. A separate full-range level control that is included connects to the amp for easy convenience. This is one of the most versatile marine amplifiers on the water today.

The Kicker KMA 450.6 Amp features a variable bass boost with KickEQ, giving your boat as much as 12dB of extra bump, as well as a powerful 12dB crossover and 24dB subsonic filter, allowing you to tune your system to perfection.

Features

• Class-D Power Supply
• Six-Channel Amplifier w/ Bridging Capability
• Three Zone Control
• Full Range Volume Controller Included
• Conformal-Coated Circuit Board
• Variable 12dB Crossover
• 24dB Subsonic Filter (amp 3 only)
• KickEQ Variable 12dB Bass Boost
• ABYC/NMMA-Compliant Power Connections
• 316L Stainless-Steel Hardware Included

Specifications

• Power (watts/ch), 2 OHM Stereo: 75 x 6
• Power (watts/ch), 4 OHM Bridged Mono: 150 x 3
• KM Remote Capable : yes
• Dimensions: 2 5/16H x 7 _W x 13 15/16L
• Frequency Response (Hz): 10-20K, +0/-1dB
• Input Sensitivity: high level 250mV-10V, low level 125mV-5V
• Signal to Noise Ratio: >95dB, a-weight, re : rated power
• Active Crossover (Amp 1 and 2): hp only; 12dB/octave, variable 0-200Hz
• Active Crossover (Amp 3): off/hp/lp; 12dB/octave, variable, 25-200Hz
• Subsonic Filter (Amp 3 Only):24dB/octave, high-pass fixed @ 25Hz
• KickEQ Boost (Amp 3 Only): variable to +12dB, centered @ 40Hz