Goya Proton Pro Board

Note: online exclusive please call to check supplier levels

PROTON PRO

RACE SINGLE

Version three of the Proton Pro has an incredible wind range at super high speed.

The rockers have been substantially reworked, with a slightly lower entry rocker, improving planing and top speed significantly.

The outlines have gotten more parallel, meaning a wider tail for more power and a more comfortable stance as well as a slightly wider nose that gives a bit more lift and early planing. The deck has also been closely re-examined and gotten flatter, so when you are gybing the boards are more stable. The deck around the footsteps has been made more comfortable so you can ride for longer and push harder. The all new bottom shapes have been reworked with quite a lot more V and V-Concave through the entire board, giving it more power and easier railing possibilities, plus extra control. The double step cutouts are still very generous, but occupy slightly less area, less area meaning less resistance and therefor more speed, while the wider outline delivers the lift needed in lighter winds.

Specific size constructions for every size deliver a customized build, with full carbon fibres running in specialized directions. As the boards get bigger, the carbon construction gets stiffer. Developed in Spain and Hawaii by Ben van der Steen and our Goya Racing Team.

The new Goya Windsurfing boards now come packed in recycled cardboard and paper tape only. No plastic bags. Keeping your planet, our planet, one step cleaner. We figured its a worthy trade off, as our love for windsurfing and the planet only grows.

• Carbon Construction, Full Carbon Hull.

• Available in 97, 112, 118, 137 liters.

• Comes with the latest generation MFC footstraps.

• Sizes 112, 118, 137 come foil ready.

• Tuttle / Deep Tuttle center finbox.

• Single out-board footstrap inserts, maximum racing performance, no compromise.

• Available in Neon Yellow & Red on Metallic Moss Green.

• High Density Full Double Sandwich.

Vent Plug Screw

This board comes with a vent plug screw that tightens onto a rubber seal ring. It is very important that the screw has been tightened before you use the board, and its equally important that its been removed before the board is transported by air, for example in your car, in summer, with the windows rolled up.

The screw needs to be tightened enough to seal the board, but not to where it might damage the rubber and/or the vent thread. Do not use power tools.

Make sure the rubber is not damaged and clean before installation. You can rinse it with fresh water. Do not get any water into the seal itself.