Ezzy Legacy XT Mast 60% 2023/24

note: online exclusive – please call before purchasing to check stock levels and availabilityTHEALL NEW 60% RDM ALTERNATIVE

• The Ezzy Legacy XT skinny masts contain 60% pre-preg carbon fiber.
• The fibers are pre-saturated to an exact resin-to-fiber ratio, then hand-wrapped around a mandrel, and then thermally cured.
• The Ezzy Skinny Mast gets its superior strength from the 50% extra thickness of its walls.
• The small diameter makes the Ezzy Skinny a dream to sail. You’ll notice the improved handling right away in your jibes.
• Ezzy tops and bottoms are interchangeable and sold individually. You can buy the perfect combination for your sail quiver. That means fewer masts. The general rule when mixing tops and bottoms is: choose a shorter bottom with a longer top.
• Talk to your local dealer about a skinny dedicated mast extension, or conversion parts to convert your existing mast extension to work with skinny masts.
• The Ezzy Sails are widely tested on standard and reduced diameter masts, and work perfectly well, but if you are looking for the perfect blend of performance and durability for Wave, Bump and Jump or even Slalom conditions, the RDM mast system is is the way to go. The Ezzy Skinny masts workFANTASTICon the entireEzzy Sail LineUp!

• Is the new 60% carbon mast interchangeable with the Hookipa 91% mast?
  Yes.

• Does the new 60% mast work well in ALL Ezzy Sails, past and present?
  Yes.

• Is the bend curve and stiffness of the 60% mast the same as the 91% mast.
  Yes.

• Is the new 60% mast softer than the 91% mast?
  No, same as the 91%.

• Is the new 60% mast as strong as the 91% mast?
  Yes.

• What kind of feeling does the 60% have compared with to the 91%?
  The 60% feels pretty good. I only notice the difference when I go back on the 91%, which still feels better to me because it is lighter.

• Will you stop producing the 91% masts in the future?
  No. We will continue with both the 60% and the 91% masts.

NOTE ON EZZY MASTS:

Ezzy Sails work great with the Ezzy Mast system, but also work with a variety of other brand masts (RDM and regular diameter). You could contact your mast maker and see if the bend of your non-Ezzy mast is compliant.

Ezzy mast bend curves are tip: 75% to 79% and base: 62% to 65%

Note: this is not carbon content. This is percentage bend relative to the midpoint bend.

We recommend using the 1st choice Ezzy Masts top and bottom with all Ezzy Elite wave sails whenever possible for uncompromised performance.

It is a life altering experience the first time you use an Ezzy Skinny Mast! You have got to try one out!

Legacy XT 60% Carbon Mast Specs Table