Kicker 10″ CompRT Loaded Subwoofer Enclosure Package

Ready to go straight out of the box, everything you need to get the bass bumping in your boat is included in this complete Kicker subwoofer package. This loaded subwoofer enclosure makes it super easy to place it anywhere in your boat’s interior and start pumping out the bass. With a mounting depth under seven inches, this sub can easily fit in lots of tight places in your boat’s interior. This carpeted sub enclosure has a clean appearance that will look like it came with your boat from the factory.

Inside this loaded enclosure is a Kicker 10″ CompRT Subwoofer and a second sub. This second sub is called a passive radiator and it reacts to the air pressure created by the primary subwoofer, producing significantly more bass without any port noise. This subwoofer setup is slim in size but creates big noise.

All of the audio packages we offer make it easy to do the install yourself or take it to a professional. Included is everything you need to configure your new stereo equipment including the compatible amplifier and amp wiring kit.

What’s Included: Kicker 10″ CompRT woofer, KMA 600.1 amplifier, and 4AWG 2-channel amp wiring kit.

Subwoofer Specifications

• Type: Thin-Profile
• Woofer: 10 in.
• Impedance (OHMS): 2
• Power (Peak/RMS): 800/400
• Sensitivity (dB 1w/1m): 96.5
• Box Top Depth: 3 7/16″
• Box Bottom Depth: 6 9/16″
• Box Width: 23 1/4″

Your new Kicker CompRT 10″ Subwoofer will be powered by their KMA 600.1 amplifier. Get ready to feel the bass with Kicker sound! This KM-Series amplifier delivers as much as 600 watts of power into one channel. Uses a Class-D power plant, 12dB crossover, and subsonic filter to help you dial in the best possible sound. You can use the remote level control to adjust the bass right from the dash. Connect the full-range RCA outputs to have the capability to expand your system. Includes the power amplifier, remote control, remote cable, and mounting hardware.

Amp Features

• Class-D Power Supply
• Mono Amplifier
• Conformal-Coated Circuit Board
• Remote Level Control Included
• Variable 12dB Crossover
• KickEQ Variable 12dB Bass Boost
• 24dB Subsonic Filter
• ABYC/NMMA-Compliant Power Connections
• 316L Stainless-Steel Hardware Included

Amp Specifications

• Power (watts/ch), Class D 2 OHM Mono: 600 x 1
• KM Remote Capable: yes
• Dimensions: 2 5/16″H x 7 W x 8 1/16″L
• Frequency Response (Hz): 25-200, +0/-1dB
• Input Sensitivity: high level 250mV-10V, low level 125mV-5V
• Signal to Noise Ratio: >95dB, a-weight, re : rated power
• Active Crossover: 12dB/octave, variable 50-200Hz, low pass only
• Subsonic Filter: 24dB/octave high-pass fixed @ 40Hz
• KickEQ Boost: variable to +12dB, centered @ 40Hz