Kicker KM 10″ Subwoofer Package

Get your boat banging by pumping out some bass from this Kicker KM 10″ Subwoofer. This complete subwoofer package has everything you need to add a sub to your boat’s speaker system and create full-range sound with your music. Drop this sub into a sealed or ported enclosure and you are ready to rock. Made specifically for use in a marine environment, this Kicker KM 10″ Subwoofer is built to withstand the power and weather it takes on.

All of the audio packages we offer make it easy to do the install yourself or take it to a professional. Included is everything you need to configure your new stereo equipment including the compatible amplifier and amp wiring kit.

What’s Included: Kicker KM 10″ woofer, KMA 600.1 amplifier, and 4AWG 2-channel amp wiring kit.

Subwoofer Features

• Two Ohm Voice Coil
• Injection Molded Polypropylene Cone
• Co-Molded Santoprene Surround
• UniPlate Back Plate and Pole Piece
• Thick Tinsel Leads
• Large Ceramic Magnet
• Rear Gasketing Included
• Polymer Basket Resists Corrosion
• Protective Terminal Cap
• Stainless Mounting Hardware Included

Subwoofer Specifications

• Woofer: 10 in.
• Impedance (OHMS): 2 SVC
• Peak Power Handling (Watts): 350
• Continuous Power Handling (Watts RMS): 175
• Sealed Enclosure Volume Min-Max (Cubic Ft.): 1 – 2.4
• Vented Enclosure Volume Min-Max (Cubic Ft.): 1.25 – 1.75
• Frequency Response (Hz): 30-500
• Mounting Depth: 5″
• Hole Diameter: 9 3/16″
• Outer Diameter: 10 11/16″

Your new Kicker KM 10″ Subwoofer will be powered by their KMA 600.1 amplifier. Get ready to feel the bass with Kicker sound! This KM-Series amplifier delivers as much as 600 watts of power into one channel. Uses a Class-D power plant, 12dB crossover, and subsonic filter to help you dial in the best possible sound. You can use the remote level control to adjust the bass right from the dash. Connect the full-range RCA outputs to have the capability to expand your system. Includes the power amplifier, remote control, remote cable, and mounting hardware.

Amp Features

• Class-D Power Supply
• Mono Amplifier
• Conformal-Coated Circuit Board
• Remote Level Control Included
• Variable 12dB Crossover
• KickEQ Variable 12dB Bass Boost
• 24dB Subsonic Filter
• ABYC/NMMA-Compliant Power Connections
• 316L Stainless-Steel Hardware Included

Amp Specifications

• Power (watts/ch), Class D 2 OHM Mono: 600 x 1
• KM Remote Capable: yes
• Dimensions: 2 5/16″H x 7 W x 8 1/16″L
• Frequency Response (Hz): 25-200, +0/-1dB
• Input Sensitivity: high level 250mV-10V, low level 125mV-5V
• Signal to Noise Ratio: >95dB, a-weight, re : rated power
• Active Crossover: 12dB/octave, variable 50-200Hz, low pass only
• Subsonic Filter: 24dB/octave high-pass fixed @ 40Hz
• KickEQ Boost: variable to +12dB, centered @ 40Hz